How long can the anti-skid effect of anti-skid steel grates be maintained?

author: Amber Feng

2024-10-18

The retention time of anti-skid effect of anti-skid steel grating plate is affected by many factors, as follows:

First, the impact of material and surface treatment

1. Material quality

High quality steel made of anti-skid walkway grating, its own strength and durability is higher, can better withstand the wear and pressure in daily use, thus helping to maintain the anti-skid effect. For example, the use of high grade carbon steel or stainless steel, which is highly resistant to corrosion and deformation, can extend the duration of the anti-slip effect. Generally speaking, good quality materials can keep the anti-slip effect for several years or even longer.

If the material is poor, it is easy to rust, deformation and other problems, which will lead to the damage of the anti-slip surface, thus reducing the anti-slip effect. It may be that in a shorter period of time, such as two years, the anti-slip performance will be significantly reduced.

2. Surface treatment

Hot dip galvanizing treatment: Hot dip galvanizing is a common surface treatment method, which can form a dense zinc layer on the surface of steel grating plate, which can not only provide good anti-corrosion protection, but also increase a certain roughness and improve the anti-slip effect. Under normal use environment, the anti-skid effect of hot-dip galvanized anti-skid steel grating plate can be maintained for 5 to 10 years or even longer. However, if the use environment is harsh, such as in a highly corrosive chemical environment, the zinc layer may be gradually eroded, and the retention time of the anti-slip effect will be shortened accordingly.
Spray treatment: spray can form a layer of plastic coating on the surface of steel grating plate, with rich color and certain anti-skid performance. The anti-slip effect of spray coatings usually lasts about 3 to 5 years, depending on the quality of the coating and the environment in which it is used. If the coating is scratched, worn or corroded by chemicals, the anti-slip effect will gradually weaken.

Second, the impact of the use environment

1. Indoor environment

In indoor environments, such as factory workshops, warehouses, etc., non-slip walkway grating are relatively small by external influences. If there is no special chemical corrosion or mechanical wear, its anti-skid effect can be maintained for a long time, generally up to more than 5 years. However, if there are often heavy dragging, chemical liquid leakage and other situations in the room, it may shorten the retention time of the anti-slip effect. For example, in the clean workshop of some electronics factories, the movement of personnel and equipment is relatively less, and the anti-slip effect of the non-slip stair tread grating can be maintained for a long time; In some mechanical processing plants, there may be oil, metal debris, etc., which will have a certain impact on the non-slip surface, and the retention time of the anti-slip effect may be shortened accordingly.

2. Outdoor environment

The outdoor environment is more complex and changeable, and the non-slip steel grating plate will be affected by factors such as sunlight, two waters, wind sand, and temperature changes. In this case, the retention time of the anti-slip effect is usually shorter than that of the indoor environment. In general, the anti-slip effect of the outdoor non-slip steel grating plate may be maintained for about 8 years.

If installed in a corrosive environment such as the seaside, due to the erosion of sea water and sea breeze, the anti-slip effect of the anti-slip steel grating plate may be significantly reduced in 2 to 5 years. In some temperate and less polluted areas, the retention time of the anti-slip effect may be relatively long.

3. special environment

In some special environments, such as high temperature, low temperature, strong acid and alkali environment, the anti-skid effect of anti-skid steel grates will be more challenged. In high temperature environment, the steel may be deformed and the anti-slip surface may be damaged; In strong acid and alkali environments, steel and surface treatment layers may be corroded, thus reducing the anti-skid effect. In these special circumstances, the retention time of anti-slip effect may be only 1 to 3 years or even less.

Third, the impact of maintenance

1. Regular cleaning

Regular cleaning of the anti-skid steel grating plate can remove the dust, oil, sundry on the surface, maintain the relative roughness of the anti-skid surface, so as to extend the retention time of the anti-skid effect. Without regular cleaning, dirt accumulation may fill the anti-skid lines and reduce friction, making the anti-skid effect gradually weaken.
For example, a simple cleaning once a month, rinsing with water or wiping with neutral cleaning agent, can effectively maintain the anti-slip performance of the anti-slip steel grating plate.

2. Repair in time

When it is found that the anti-slip steel grille plate is damaged, deformed or the anti-slip surface is worn, it should be repaired in time. It can be repaired by welding, replacing parts, etc., to ensure that the structure of the non-slip steel grid plate is complete and the anti-slip performance is good. If it is not repaired in time, the damage will gradually expand, and the anti-skid effect will rapidly decline.

For example, if the cross bar of the steel grating plate is found to be broken, it should be welded and repaired immediately, so as not to affect the overall anti-slip effect.

To sum up, the anti-slip effect of anti-slip steel grille plate retention time varies due to material, surface treatment, use environment and maintenance and other factors, generally ranging from 10 years. In order to extend the retention time of anti-skid effect, we should choose good quality products, reasonable installation and use, and carry out regular maintenance.

Factors affecting the quality of perforated metal panel

Maintenance method of perforated metal