Hebei Weijia Metallgitter Co., Ltd.
Vorhangfassade Mesh/Perforiertes Metallblech/Stahlgitter
- Produktname
- Schlüsselwörter
- Produktmodell
- Produktübersicht
- Produktbeschreibung
- Volltextsuche
 |
Material: Kohlenstoffarme Stahlplatte, verzinkte Stahlplatte, Edelstahlplatte, Aluminiumplatte usw.
Lochform: Rund, Rechteckig, Quadratisch, Dreieck, Diamant, Sechseckig, Kreuz, Schlitz und andere spezielle Muster
Stanzkategorien: CNC-Perforieren, CNC-Revolverperforieren, Laserschneiden, Wasserstrahlschneiden, Perforieren von Spule zu Spule, Perforieren von Spule zu Stücken, Ätzen usw.
MATERIAL
Kohlenstoffarme Stahlplatte, verzinkte Stahlplatte, Edelstahlplatte, Aluminiumplatte usw.
Lochform
Rund, Rechteckig, Quadratisch, Dreieck, Diamant, Sechseckig, Kreuz, Schlitz und andere spezielle Muster
PUNCH-KATEGORIEN
CNC-Perforieren, CNC-Revolverperforieren, Laserschneiden, Wasserstrahlschneiden, Perforieren von Spule zu Spule, Perforieren von Spule zu Stücken, Ätzen usw.
OBERFLÄCHENBEHANDLUNG
Unbehandlung, pulverbeschichtet, eloxiert, PVDF (die Oberfläche ist viel glatter, ebener und glänzender, sie hat auch eine viel längere Lebensdauer als die übliche Behandlung)
ANWENDUNG
Perforiertes Metallgitterist weit verbreitet in chemischen Maschinen, pharmazeutischen Geräten, Lebensmittel- und Getränkemaschinen, Zigarettenmaschinen, Erntemaschinen, chemischen Reinigungsmaschinen, Bügeltischen, Schalldämpfungsgeräten, Kühlgeräten (zentrale Klimaanlage), Hydraulikarmaturen, Filtrationsgeräten und anderen Branchen.
RUNDLÖCHERSPEZIFIKATION
Beschreibung | Lochgröße (mm) | Tonhöhe (mm) | Offene Fläche | Dicke (mm) | |||||
0.4 | 0.5 | 0.8 | 1.0 | 1.2 | 1.5 | ||||
R0.8 T2 | 0.8 | 2 | 0.15 | - | - | - | |||
R1 T2 | 1 | 2 | 0.23 | - | - | - | - | ||
R1.2 T2.25 | 1.2 | 2.25 | 0.26 | - | - | - | |||
R1.2 T2.5 | 1.2 | 2.5 | 0.21 | - | - | - | |||
R1.5 T2.75 | 1.5 | 2.75 | 0.27 | - | - | - | - | ||
R1.5 T3 | 1.5 | 3 | 0.23 | - | - | - | - | ||
R1.8 T3.5 | 1.8 | 3.5 | 0.24 | - | - | - | - | - | |
R2 T3 | 2 | 3 | 0.40 | - | - | - | |||
R2 T3.5 | 2 | 3.5 | 0.30 | - | - | - | - | ||
R2 T4 | 2 | 4 | 0.23 | - | - | - | - | - | |
R2.5 T3.5 | 2.5 | 3.5 | 0.46 | - | - | - | - | - | |
R2.5 T4 | 2.5 | 4 | 0.35 | - | - | - | - | - | |
R2.5 T4.5 | 2.5 | 4.5 | 0.28 | - | - | - | - | - | |
R2.5 T5 | 2.5 | 5 | 0.23 | - | - | - | - | - | |
R3 T5 | 3 | 5 | 0.33 | - | - | - | - | - | |
R3 T6 | 3 | 6 | 0.23 | - | - | - | - | - | |
R3.5 T5 | 3.5 | 5 | 0.44 | - | - | - | - | - | |
R4 T5 | 4 | 5 | 0.58 | - | - | - | |||
R4 T6 | 4 | 6 | 0.40 | - | - | - | - | - | |
R4 T8 | 4 | 8 | 0.23 | - | - | - | - | - | |
R5 T7 | 5 | 7 | 0.46 | - | - | - | - | - | |
R5 T8 | 5 | 8 | 0.35 | - | - | - | - | - | |
R5 T10 | 5 | 10 | 0.23 | - | - | - | - | - | |
R5 T25 | 5 | 25 | 0.04 | - | - | - | - | - | |
R6 T8.5 | 6 | 8.5 | 0.45 | - | - | - | - | - | |
R6 T9 | 6 | 9 | 0.40 | - | - | - | - | - | |
R6 T10 | 6 | 10 | 0.33 | - | - | - | - | - | |
R7 T10 | 7 | 10 | 0.44 | - | - | - | |||
R8 T11 | 8 | 11 | 0.48 | - | - | - | |||
R8 T12 | 8 | 12 | 0.40 | - | - | - | |||
R8 T15 | 8 | 15 | 0.26 | - | - | - | |||
R10 T13 | 10 | 13 | 0.54 | - | - | - | |||
R10 T14 | 10 | 14 | 0.46 | - | - | - | |||
R10 T15 | 10 | 15 | 0.40 | - | - | - | |||
R10 T18 | 10 | 18 | 0.28 | - | - | - | |||
R12 T16 | 12 | 16 | 0.51 | - | - | - | |||
R12 T17 | 12 | 17 | 0.45 | - | - | - | |||
R15 T20 | 15 | 20 | 0.51 | - | - | - | |||
R15 T21 | 15 | 21 | 0.46 | - | - | - | |||
R20 T25 | 20 | 25 | 0.58 | - | - | - | |||
R20 T27 | 20 | 27 | 0.50 | - | - | - | |||
R20 T28 | 20 | 28 | 0.46 | - | - | - | |||
R20 T30 | 20 | 30 | 0.40 | - | - | - | |||
R25 T34 | 25 | 34 | 0.49 | - | - | - | |||
RUNDLÖCHERSPEZIFIKATION
Beschreibung | Lochgröße (mm) | Tonhöhe (mm) | Offene Fläche | Dicke (mm) | |||||
2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | ||||
R2.5 T3.5 | 2.5 | 3.5 | 0.46 | - | |||||
R2.5 T4 | 2.5 | 4 | 0.35 | - | |||||
R2.5 T4.5 | 2.5 | 4.5 | 0.28 | - | |||||
R2.5 T5 | 2.5 | 5 | 0.23 | - | |||||
R3 T5 | 3 | 5 | 0.33 | - | - | ||||
R3 T6 | 3 | 6 | 0.23 | - | - | ||||
R4 T6 | 4 | 6 | 0.40 | - | |||||
R4 T8 | 4 | 8 | 0.23 | - | - | - | |||
R5 T7 | 5 | 7 | 0.46 | - | |||||
R5 T8 | 5 | 8 | 0.35 | - | - | - | |||
R5 T10 | 5 | 10 | 0.23 | - | - | - | - | ||
R5 T25 | 5 | 25 | 0.04 | - | - | - | - | ||
R6 T8.5 | 6 | 8.5 | 0.45 | - | - | ||||
R6 T9 | 6 | 9 | 0.40 | - | - | - | |||
R6 T10 | 6 | 10 | 0.33 | - | - | - | - | - | |
R7 T10 | 7 | 10 | 0.44 | - | - | - | - | - | |
R8 T11 | 8 | 11 | 0.48 | - | - | - | - | - | |
R8 T12 | 8 | 12 | 0.40 | - | - | - | - | - | - |
R8 T15 | 8 | 15 | 0.26 | - | - | - | - | - | - |
R10 T13 | 10 | 13 | 0.54 | - | - | - | - | - | |
R10 T14 | 10 | 14 | 0.46 | - | - | - | - | - | |
R10 T15 | 10 | 15 | 0.40 | - | - | - | - | - | - |
R10 T18 | 10 | 18 | 0.28 | - | - | - | - | - | - |
R12 T16 | 12 | 16 | 0.51 | - | - | - | - | - | |
R12 T17 | 12 | 17 | 0.45 | - | - | - | - | - | - |
R15 T20 | 15 | 20 | 0.51 | - | - | - | - | - | - |
R15 T21 | 15 | 21 | 0.46 | - | - | - | - | - | - |
R20 T25 | 20 | 25 | 0.58 | - | - | - | - | - | - |
R20 T27 | 20 | 27 | 0.50 | - | - | - | - | - | - |
R20 T28 | 20 | 28 | 0.46 | - | - | - | - | - | - |
R20 T30 | 20 | 30 | 0.40 | - | - | - | - | - | - |
R25 T34 | 25 | 34 | 0.49 | - | - | - | - | - | - |
QUADRATISCHE LOCHSPEZIFIKATION
Beschreibung | Lochgröße (mm) | Tonhöhe (mm) | Offene Fläche | Dicke (mm) | |||||
0.4 | 0.5 | 0.8 | 1.0 | 1.2 | 1.5 | ||||
C3 U5 | 3 | 5 | 0.36 | - | - | ||||
C5 U7.5 | 5 | 7.5 | 0.44 | - | - | - | |||
C5 U8 | 5 | 8 | 0.39 | - | - | - | |||
C5.5 U7.5 | 5.5 | 7.5 | 0.54 | - | - | - | - | ||
C5.5 U8 | 5.5 | 8 | 0.47 | - | - | - | |||
C6 U10 | 6 | 10 | 0.36 | - | - | - | - | - | |
C6 U12 | 6 | 12 | 0.25 | - | - | - | - | - | |
C7 U10 | 7 | 10 | 0.49 | - | - | - | - | - | |
C8 U10 | 8 | 10 | 0.64 | - | - | - | - | ||
C8 U12 | 8 | 12 | 0.44 | - | - | - | |||
C10 U12 | 10 | 12 | 0.69 | - | - | - | |||
C10 U14 | 10 | 14 | 0.51 | - | - | - | - | - | |
C10 U15 | 10 | 1.5 | 0.44 | - | - | - | - | - | |
C10 U20 | 10 | 20 | 0.25 | - | - | ||||
C15 U20 | 15 | 20 | 0.56 | - | - | - | - | - | |
C19 U22 | 19 | 22 | 0.75 | - | - | ||||
C20 U28 | 20 | 28 | 0.51 | - | - | - | - | - | |
C20 U40 | 20 | 40 | 0.25 | - | - | - | - | - | |
C22 U44 | 22 | 44 | 0.25 | - | |||||
C25 U50 | 25 | 50 | 0.25 | - | - | ||||
C30 U35 | 30 | 35 | 0.73 | - | - | - | |||
C30 U60 | 30 | 60 | 0.25 | - | - | - | - | ||
C40 U50 | 40 | 50 | 0.64 | - | - | - | - | ||
C40 U80 | 40 | 80 | 0.25 | - | - | - | |||
C50 U100 | 50 | 100 | 0.25 | - | - | - | - | ||
OBLONG LOCH SPEZIFIKATION
Beschreibung | Lochgröße (mm) | Tonhöhe (mm) | Offene Fläche | Dicke (mm) | |||||
0.4 | 0.5 | 0.8 | 1.0 | 1.2 | 1.5 | ||||
LR1 × 10Z | 1 × 10 | 7 × 14 | 0.2 | - | |||||
LR1,5 × 12Z | 1,5 × 12 | 10,3 × 16 | 0.21 | - | |||||
LR1,5 × 20Z | 1,5 × 20 | 4 × 50 | 0.30 | - | |||||
LR2 × 10Z | 2 × 10 | 10 × 15 | 0.26 | - | |||||
LR2 × 20Z | 2 × 20 | 10 × 25 | 0.31 | - | |||||
LR3 × 20Z | 3 × 20 | 6 × 26 | 0.74 | - | - | - | |||
LR3 × 20Z | 3 × 20 | 14 × 26 | 0.32 | - | - | - | |||
LR4 × 20Z | 4 × 20 | 10 × 25 | 0.61 | - | - | - | - | ||
LR4 × 25Z | 4 × 25 | 6,5 × 41 | 0.66 | - | - | - | - | ||
LR4,5 × 25Z | 4,5 × 25 | 7 × 60 | 0.51 | - | - | - | - | ||
LR4,75 × 20Z | 4,75 × 20 | 15 × 25 | 0.48 | - | - | - | - | ||
LR5 × 20Z | 5 × 20 | 20 × 25 | 0.38 | - | - | - | - | ||
LR6 × 20Z | 6 × 20 | 24 × 24,8 | 0.38 | - | - | - | - | - | |
LR6 × 20Z | 6 × 20 | 26 × 40 | 0.22 | - | - | - | - | - | |
LR7 × 20Z | 7 × 20 | 13 × 47,5 | 0.42 | - | - | - | - | - | |
LR7 × 25Z | 7 × 25 | 30 × 30 | 0.37 | - | - | - | - | - | |
LR8 × 40Z | 8 × 40 | 26 × 47,5 | 0.50 | - | - | - | - | - | |
LR10 × 40Z | 10 × 40 | 20 × 50 | 0.76 | - | - | - | - | - | |
LR2,1 × 20Z | 2,1 × 20 | 5 × 25 | 0.33 | - | - | ||||
LR2,4 × 20Z | 2,4 × 20 | 5 × 25 | 0.38 | - | - | ||||
LR3 × 20Z | 3 × 20 | 5,5 × 25 | 0.41 | - | - | - | |||
LR4,5 × 20Z | 4,5 × 20 | 8 × 25 | 0.44 | - | - | - | - | - | |
LR5 × 30Z | 5 × 30 | 9 × 35 | 0.46 | - | - | - | - | - | |
LR7 × 25Z | 7 × 25 | 12 × 30 | 0.25 | - | - | - | - | - | |
